More Plans by This Designer/Architect

4 Bedrooms

3 Baths

2116 Sq ft

3 Bedrooms

2 Baths

1450 Sq ft

3 Bedrooms

2 Baths

1260 Sq ft

3 Bedrooms

2.5 Baths

1352 Sq ft

3 Bedrooms

2.5 Baths

1584 Sq ft

3 Bedrooms

2 Baths

1630 Sq ft

3 Bedrooms

2.5 Baths

2020 Sq ft

3 Bedrooms

2.5 Baths

2310 Sq ft

3 Bedrooms

2.5 Baths

1860 Sq ft

4 Bedrooms

3.5 Baths

2520 Sq ft

3 Bedrooms

2.5 Baths

2996 Sq ft

3 Bedrooms

2.5 Baths

2572 Sq ft

3 Bedrooms

2.5 Baths

2242 Sq ft

3 Bedrooms

2 Baths

1563 Sq ft

4 Bedrooms

3 Baths

2288 Sq ft

To help you determine if this plan will fit within your budget, our Instant Cost-to-Build™ report will provide you a location specific Cost-to-Build™, which is based on your zip code. Order an instant Cost-to-Build™ Report today to get an accurate, location specific construction cost for any house plan on Houseplans.com. It's a great way to budget your project and compare different plans. It's an easy process and your Cost-to-Build™ Report will be ready to print out instantly.

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see What's Included?

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be, but not limited to, earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.